Switching On The Appliance; Setting The Temperature; Cool-Fresh Compartment - Siemens KG39FSB30/19 Gebrauchsanleitung

Switching on
the appliance
Switch on the appliance with the On/Off
button, Fig. "/1. The temperature
warning signal is switched off by
pressing the alarm button, Fig. "/2.
The temperature displays flash
and the alarm button display is lit up,
until the appliance has reached the set
temperatures.
The light in the refrigerator compartment
is lit when the door is open.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 °C
■
Cool-fresh compartment: at almost
■
0 °C
Freezer compartment: –18 °C
■
Note
If the light switch, Fig. !/10, is pressed
when the door is open, the light and the
displays on the controls go out.
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from
+3 °C to +8 °C.
Keep pressing temperature setting
button 7 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 8.
We recommend a setting of +4 °C.
Perishable food should not be stored
above +4 °C.

Cool-fresh compartment

The temperature in the "cool-fresh"
compartment has been set to almost
0 °C at the factory and should not be
changed if at all possible.
If frost forms on the refrigerated food,
the temperature can be increased. (See
chapter "Eliminating minor faults
yourself".)
Freezer
The temperature can be set from
-16 °C to -24 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 5.
We recommend a factory setting of -18
°C in the freezer compartment.
en
31