Panasonic NN-DS596M Bedienungsanleitung Seite 63

Questions and Answers
Q: My oven has an odour and
generates smoke when using the
combination, oven and grill
function. Why?
A: After repeated use, it is recommended
to clean the oven and then run the oven
without food. This will burn off any food,
residue or oil which may cause an odour
and/or smoking.
Q: The oven stops cooking by
microwave and 'H97' or 'H98'
appears in the display. Why?
A: This display indicates a problem with the
microwave generation system. Please
contact an authorised Service Centre.
Q: The fan continues to rotate after
cooking. Why?
A: After using the oven, the fan motor may
rotate to cool the electrical components.
This is normal and you can continue
using the oven at this time.
Q: Can I check the pre-set oven
temperature while cooking or
preheating by oven?
A: Yes. Touch Oven and the oven
temperature will appear in the display
window for 2 seconds.
Q: "D" appears in the display and the
oven does not cook. Why?
A: The oven has been programmed in
demo mode. This mode is designed for
retail store display. Deactivate this mode
by touching Micro Power once and
tapping Stop/Cancel 4 times.
Q: The word prompt has disappeared
on my display, I can only see
numbers. Why?
A: There may have been a power failure,
and the word prompt is disabled. Unplug
the oven for a few seconds, then plug it
in again. When "88:88" is displayed, tap
Start until your language is displayed.
Then set the clock. Refer to page 22.
Q: The operation guide has disappeared
on my display, I can only see
numbers. Why?
A: The operation guide was turned off by
tapping Timer/Clock 4 times. When
colon or time of day is displayed, touch
Timer/Clock 4 times to turn the operation
guide back on.
Q: The oven stops cooking by steam or
combination with steam and 'U14'
appears in the display. Why?
A: The water tank is empty and the
operation guide has been turned off.
Re-fill the water tank, position back in
the oven and touch Start to resume
cooking. If this happens 3 times during
operation, cooking will stop. Press Stop/
Cancel to reset.
Q: The control panel keys do not
respond when tapped. Why?
A: Ensure the oven is plugged in. The oven
may be in stand-by mode. Open and
close the door to activate.
61
EN