iRobot Roomba Combo j7+ Bedienungsanleitung Seite 13

Cleaning the Mopping Pad
Note: You can clean your
EN
Mopping Pads two ways; either
by hand washing or in a washing
machine.
Hand washing
Thoroughly wash the Pad with
warm water.
Machine washing
Wash using the warm cycle, then
air dry. Do not tumble dry. Do not
wash with delicates.
7 For more information, visit global.irobot.com
Emptying the Bin
1
Press the Bin Release Button to
remove the Bin.
2
Open the Bin Door to empty
the Bin.
3
Place the Bin back in the robot.
Cleaning the Filter
1
Remove the Bin. Remove the Filter by
grasping both ends and pulling it out.
2
Remove debris by tapping the Filter against
your rubbish bin.
3
Reinsert the Filter with the ridged grips
facing out. Place the Bin back in the robot.
Important: The robot will not run
if the Filter is not installed correctly.
Replace the Filter every two (2) months.