iRobot Roomba Combo j7+ Bedienungsanleitung Seite 12

Troubleshooting your Automatic Dirt Disposal
Your Dirt Disposal will tell you if something is wrong via the LED Indicator on
the front of the Canister and through the iRobot Home App.
LED Indicator Common error
Solid red Bag full or missing
Blinking red There is a leak or
a clog in the Dock
Evacuation path
This product has been equipped with a thermal protector designed to
protect against damage due to overheating. If the protector activates, the
motor will stop running. If this happens, unplug the unit, allow it to cool for
30 minutes, clear any obstructions from the Evacuation Port and Evacuation
Tube, then plug the unit back in.
How to fix
1. Replace the Bag if it is full or missing.
2. Make sure that the Bag is securely
inserted.
3. If problem persists, remove any debris
from the Port on the bottom of your
robot and the Dirt Disposal.
1. Make sure that the Canister Lid is
pushed down and firmly sealed.
Hold the Clean Button on your robot
down for two (2) seconds to manually
empty the Bin.
2. Remove any debris from the Port on
the bottom of your robot and Dirt
Disposal.
3. Unplug the Dirt Disposal from the
wall. Place it on its side and inspect
the Debris Evacuation Tube for debris.
If necessary, remove the Tube to clear
any debris.
Care and maintenance
Care and maintenance instructions
To keep your robot running at peak performance, perform the
procedures on the following pages.
There are additional instructional videos in the iRobot Home App. If you
notice the robot picking up less debris from your floor, empty the Bin,
clean the Filter and clean the Brushes.
Part Care frequency
Mopping Pad Clean after a mopping job
Bin Wash Bin as needed
Filter Clean once a week (twice a
week if you have a pet) Do
not wash
Charging Contacts Clean every two (2) weeks
Full Bin Sensor Clean every two (2) weeks
Front Caster Wheel Clean every two (2) weeks
Edge-Sweeping Clean once a month (twice
Brush and Multi- a month if you have a pet)
Surface Brushes
Sensor, Camera Clean once a month
Window and
Pad Shelf
Bags -
Blower Cover inside Once every month (remove
Canister debris from the Blower Cover)
Note: iRobot manufactures various replacement parts and assemblies. If you
think that you need a replacement part, please contact iRobot Customer
Care for more information.
*Replacement frequency may vary. Parts should be replaced if there is visible wear.
Roomba Combo™ j7+ Owner's guide
Replacement frequency*
After 30 washes
Every two (2) months
Every 12 months
Every 12 months
Bags should be replaced
when prompted by the
LED Indicator/App
6
EN