HBM WE2111 Bedienungsanleitung Seite 7

WE2111, Command Descriptions
3 Extended command set: Overview
A3953-1.0 en/de
3.1 Command
Commands consist of three ASCII-characters (e.g. ADR).
The WE2111 responds with 0crlf to indicate that a
command has been accepted, or ?crlf to indicate that the
command was either not understood or could not be
performed. Only the Sxx command and RES command
do not have a response.
Some commands will respond with additional failure
codes to help diagnose the problem (e.g: CDL, TAR,
TAV, TAS and PRN):
Response of the commands:
?crlf Command not understood
0crlf Command correctly operated
1crlf Command failed: Scale in motion
2crlf Command failed: Parameter or scale out of range
3crlf Command failed: System error
4crlf Command failed: Device not ready
Note
crlf represents 2 bytes: carriage return (0D
line feed (0A ).
H
) followed by
H
7