HBM WE2111 Bedienungsanleitung Seite 11

WE2111, Command Descriptions
ADR
A3953-1.0 en/de
Network address
Set the address of a unit.
General
No. of parameters
Save changes.
Increment Trade Counter
Response Time of command
Response Time of query
Parameter Details
Parameter Description
1 Address
2 Serial Num-
ber
Each WE2111 must be assigned a unique address to
enable the implementation of a multi-drop network. This
address can be set using the digital setup menus as
described in the reference manual. It is also possible to
use the network itself to set the unit addresses. The
ADDRESS COMMAND is used to assign the unit
address via the communications network.
Example 1:
Change address of unit from 1 to 2
2
with TDD1
no
Range Default
0 ... 31 31
"0000001" "xxxxxxx"
... factory set
"9999999"
11