Silvercrest 282017 Bedienungsanleitung Seite 11

NOTE
► The water tank
appliance cannot be switched on.
♦ Switch the on/off switch
The green "ON" LED
Fault rectification
This section contains important information on fault localisation and rectification.
WARNING
Observe the following safety information to avoid risks and property damage:
► Repairs to electrical appliances may only be carried out by specialists trained
by the manufacturer. Improper repairs can pose considerable risk to users
and can cause damage to the appliance.
Malfunction causes and remedies
The following table will help with localising and remedying minor malfunctions:
Defect Possible cause
The power adapter
plugged in.
The mains power socket is not
The appliance
supplying power.
will not switch
Safety stop due to missing or
on.
incorrectly inserted water tank
The water tank
The air intake opening
The appliance
air outlet opening
produces no
covered.
or very little
Windows and doors in the room
condensate.
are open.
NOTE
► If you cannot solve the problem with any of the aforementioned methods,
please contact the Customer Service department.
■ 8 │ GB │ CY
All manuals and user guides at all-guides.com
must be inserted fully into the appliance, otherwise the
7
3 to position "I" to switch the appliance on.
lights up.
2
is not
10
7
7 is full.
5 or the
is soiled or
Rectification
Plug the power adapter
mains power socket.
Check the house fuse.
Ensure the water tank
.
correctly.
Empty the water tank
it into the appliance.
Ensure that the air intake and outlet
openings ( 5 + ) are clean and
free of blockages.
Close the windows and doors.
into the
10
7 is inserted
and reinsert
7
SLE 500 A1