Setting The Present Time - Panasonic CZ-RTC2 Bedienungsanleitung

3. Setting the Present Time

1. Press and hold
present day and time setting mode.
Once you enter the setting mode,
"time" fl ash.
2. Set " " to today's day of the week.
1
Press *
display) in the order of : Su → Mo → Tu → .... Press
to move it in the order of : Su → St → Fr → ....
*1
While in time setting mode, the Temperature setting
buttons function as
to change the present "hour" in the range of 0 to 23 *
3. Press /
Set the present hour and press
The "hour" digits light up, and the "minute" digits start fl ashing.
*2
If the clock uses the 12 hours AM/PM setting, the hour is displayed in the
range of AM 0 to 11/PM 0 to 11.
4. Press / to change the present "minute" in the range of 0 to 59.
Set the present minute and press
fi nishes the setting mode.
Note
• The unit returns to the normal mode if
during the setting. In this case, all the settings in progress will be lost.
• If the present time is invalid, "– – : – –" is displayed.
If the power failure for more than 1 hour occurs, check if the set data of day and time are valid.
for more than 2 seconds to enter the
to move " " (fl ashing on the
(changing day) button.
.
. The day and time are set and the unit
is pressed or there is no operation made for 3 minutes
, " "(day) and
3,4
EN-5
1,3,4 2
2
.
EN