Mixcder E9 Bedienungsanleitung Seite 4

5. Pair with Wireless
1). Make sure the headphone is turned off.
2). The distance between two devices shall not exceed 3ft]1 m.
3). Tum on the Wireless function Ofthe paired devices.
4). Press and hold the power button on the headphone until it
tums on. Continue to press and hold on the power button until
you see the LED indicator flashes blue and red altemately,
which means your headphone is in "pairing mode" waiting to
be paired with your device. You will hear the prompt.
5). Select the "Mixcder E9" to pair. After successful pairing, the
LED turns to flasing blue. You will hear the prompt.
Note: Before pairing the headphone with computer, please
make sure your computer or laptop has the built-in Wireless
feature. If not, you must purchase a Wireless dongle,
preferably version 2.1 or above. When tuming on, Mixcder E9
will automatically pair with the last paired device. Due to
different systems, some computers or laptops may need to be
manually paired each time.
Devices
EN-3