Femometer DET-1015 Bedienungsanleitung Seite 35

For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE1: At 80 MHz and 800 MHz, the separation distance for the frequency range applies.
NOTE2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Table 5
Recommended separation distances between RF wireless communications
The device is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the device
can help prevent electromagnetic interference by maintaining a minimum
distance between RF wireless communications equipment and the device
as recommended below, according to the maximum output power of the
communications equipment.
Maximum
Frequency
Power Distance
MNz
W
385 1.8 0.3
450 2 0.3
710
745 0.2 0.3
780
810
870 2 0.3
930
1720
1845 2 0.3
1970
2450 2 0.3
5240
5900
0.2 0.3
5785
Note1: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures,objects and people.
66
equipment
Electromagnetic
IEC 60601 Compliance
Environment -
Test Level Level
Guidance
27 27
RF wireless
communications
28 28
equipment should be
used no closer to any
part of the device,
including cables, than
9 9
the recommended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended
28 28 separation distance
Where P is the maximum
output power rating
of the ransmitter in
watts (W) according
to the transmitter
28 28
manufacturer and d
is the recommended
separation distance
in meters (m). Field
28 28
strengths from fixed
RF transmitter, as
determined by
an electromagnetic site
survey, should be less
than the compliance
level in each frequency
range. Interference may
9 9
occur in the vicinity of
equipment marked with
the following symbol:
WARNINGS!
· This device should not be used in the vicinity or on the top of other electronic
equipment such as cell phone, transceiver or radio control products. If you have
to do so, the device should be observed to verify normal operation.
· The use of accessories and power cords other than those specified, with the
exception of cables sold by the manufacturer of the equipment or system as
replacement parts for internal components, may result in increased emissions or
decreased immunity of the equipment or system.
Warranty and after-sales service
Warranty
Thermometer is warranted by manufacture to be free from defects in material and
workmanship under normal use and service for a period of one year from the date
of delivery to the first user who purchases the instrument. This warranty does
not cover batteries, damage to the probe window, or damage to the instrument
caused by misuse, negligence or accident, and extends only to the first purchaser
of the product. Additionally this warranty becomes void, if the thermometer is
operated on anything other than this brand thermometer probe covers.
Service
The thermometer has a limited one year warranty. Do not attempt to disassemble
or repair the thermometer by yourself. Should service be required during or
after the warranty period you must contact the manufacturer. Repackage the
thermometer carefully in its original packaging or securely pack to avoid damage
during shipping. Include the original sales slip indicating the date of purchase,
a note describing the problem, and your return address. Send the thermometer
prepaid and insured.
The lay operator or lay responsible organization should contact the manufacturer
or the manufacturer's representative:
- for assistance, if needed, in setting up, using or maintaining the
thermometer; or
- to report unexpected operation or events.
If you suspect any product issues during the warranty period, please contact
customer services via: support@femometerfamily.com
EN
67