Hama AWS-100 Bedienungsanleitung Seite 7

ADJUSTING SAME TIME FORANALOG (HAND) AND DIGITAL(LCD)
If the time displayed on the LCDand on the hands are not the same, please
adjust them as fol owlng steps:
Press "ADJUST" key for 3 seconds to enter pre-adjusting mode until the
d han icon V " flashing ontheLCD
Press and hold "ADJUST" key with the minute hand revolving quickly to
adjust the desired time on the hands.
Press "SET" key with the Minute digit on the LCDflashing, then press
"ADJUST" key to adjust the Minute digit to be the same as the minute hand
indicates
Press "SET" key again until the Hour digiton the LCDflashing
Press "ADJUST" key to adjust the hour digit according to the value which
the hour hand indicates
Press "MODE" key to save and exitthe pre adjusting mode
NOTE:
1. In ex-factorymode,the analogtime(hands)hasbeenset at 2:00before
delivery; Ifs the same as digital time(LCD)when insert battery. so you
neednt to adjust same time to receive RCsignal when use the clock in first
time.
2. When you replace new battery, the Analog & digital time might not be
the same; you must set both analog & digital time the same again before
running the clock and receive RCsignal
12
Pre-adjusting
MANUALLY SETTING THE TIME AND DATE
If you areoutof the reachofthe RadioControlled Transmitteror ifthe
reception is not reachable, you can set the time manually. As soon as the
transmitter is received again,the clock will automatically synchronize with the
receiving time
In normal t imemodeorMonth/Date/Day m ode,pressandholdthe SETkey
for 3 seconds until the second digit flashing
Press the ADJUST key to increase the value of the flashing digit.
press SET again to step the setting items. The sequence is:
Second > Minute > Hour > 12/24 hour >Year > Month > Date > Tame Zone
press the ADJUST key to increase the value of the flashing digit and select
Time Zone
If your local time is different from the RCreceived time, set the desired time
zone value by pressing "ADJUST" key when the time zone digit is flashing
The available time difference
Minute (digital)
Handsetting
setting
Finishing Hour(digital)
display setting
is between -23 hours to +23 hours. After
13