Main Brush; Side Brush; Two-In-One Water Tank And Dustbin - Wilfa Innobot Anleitung

MAIN BRUSH

The provided cleaning brush has sharp blades, keep it out of reach of children.
1. Disassemble the main brush by turning the robot over, lift the buckle and take
out the main brush.
2. Clean it by using the provided cleaning brush. Use the side with the hook to
pick up and cut hair and fibre and separate it from the main brush. Use the
cleaning brush to clean surface dirt. We recommend replacing the main brush
every 6-12 months.
Buckle

SIDE BRUSH

1. Turn the robot over. Use a screwdriver to remove the screws and take off the
brush.
2. Clean it by using the cleaning brush that comes with the product. Use the side
with the hook to pick up and cut hair and fibre and separate it from the side
brush. Use the brush to clean the surface dirt. We recommend replacing the
side brush every 6-12 months.

TWO-IN-ONE WATER TANK AND DUSTBIN

Do not soak the water tank while cleaning the dust compartment. It is
recommended to replace the filter with an original one every 3-6 months to
ensure cleanliness.
1. Press the release button on the tank and pull it out.
2. Open the cover and throw the rubbish. Use the cleaning brush to clean it.
15
EN