C) Fog Effect - Renkforce Moon-Fog Bedienungsanleitung

c) Fog effect

• Pull out the aerial of the cordless remote control all the way.
• Slide the button cover of the radio remote control downwards.
• Once the device has reached its operating temperature, the red indicator LED on the wire-bound remote control is
lit. The device is now ready to fog.
• To activate the fog emission, push the button on the radio remote control or the button on the wired cordless remote
control.
• The device emits fog as long as you keep one of the buttons pressed.
Ensure that the tank never runs empty during fog operation. Observe the fill level display (3) for this.
Should this happen nevertheless, turn the device off immediately using the mains switch (1) (put the switch
in the position OFF!) and let it cool down.
Refill the tank after cooling.
If no fog or haze emerges, the device is still warming up or reheating.
Slight fog lag after deactivation of the device is normal and does not suggest a defect.
If you no longer require the device, disconnect the mains plug and let the device cool down.
Then empty the tank if the device is not used for any extended period. This prevents leaking of fog liquid
during transport or storage.
25