imilab C21 Benutzerhandbuch Seite 5

3. Make sure to position the base unit so that the arrow
is pointing up. Secure the base unit in place by tightening
the screws into the plastic anchors.
4. Align the groove at the bottom
snap it in and rotate it in the direction shown below until locked in place.
A Warning:
To avoid any damages or injuries, the device must be securely fastened to the
floor/wall asspecified in the Installation instructions.
A When mounting
Please note that the wall must be able to Support at least triple the product's total
weight.
of the camera with the raised part on the base,
upward perspective
the security camera on a wall: