Step 9: Mounting The System (Optional); Step 10: System Start-Up - Ispring Rcc Serie Bedienungsanleitung

Step 9: Mounting the System (Optional)

 Mounting the system is NOT required. The system does NOT need to be
mounted to work correctly.
 Please note that if the system is to be mounted, it is recommended to use
two 10 x 1-1/4 Phillips Flat Wood Screws (not included). This will make
replacing filter cartridges easier.
Note: If you plan on mounting/hanging the system, it is highly recommended to include supports
under each of the bottom three housings. Supports under the housings will take the water weight
off the housing threads and ensure the thread strength does not decay over the years.
Step 10: System Start-up (model-specific sub-steps are marked with a *)
Note:
If your model has a UV stage, do not plug in the UV power until the system has been fully flushed.
Step 10. a. Make sure no tubings are kinked. Turn the Tank Shut-off Valve OFF
(perpendicular to the YELLOW tube). Place a towel under the system to catch any water
leaks.
Step 10. b. Disconnect the RO membrane housing cap inlet tubing. Open the Feed Water Adapter
Valve (AFW43) and Cold-Water Supply Valve (CWSV), and flush the first three stages into
a bucket until the water turns clear.
Step 10. c. Once the water is clear, shut off the AFW43 and reconnect the tubing to the RO
membrane housing cap. You will want to flush the first three stages like this whenever
they are changed.
Step 10. d. Open the RO faucet. Slowly open the AFW43 and check for any leaks. The top 3
causes of leaks are 1) The tubing is not fully inserted into the quick-connect fitting. 2)
The O-ring is not in the correct place or is kinked. 3) The Housing/Cap is not tightened
properly or is misaligned with the threads.
Step 10. e. Water will start slowly trickling from the RO faucet within 5 minutes. Let the faucet
trickle for at least 15 minutes to flush out the entire system apart from the tank. The water
may appear black at first due to loose carbon from new carbon filters. It will eventually turn
clear apart from many tiny air bubbles leaving the system.
14 WWW.123FILTER.COM | +1 (678) 261-7611 | SUPPORT@123FILTER.COM