Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Press the Up/Down-buttons for setting the desired starting address. Now you can start operating the LED
SDR-8 via your lighting controller.
The individual channels and their features are listed under DMX-protocol.
W2
B2
G2 R2
W1
B1
G1 R1
DMX-protocol
The device has two different DMX channel modes. The Control Board allows you to assign the DMX channel
mode.
Mode/Channel Decimal Hexad. Percentage
10 Ch
14 Ch
1
1
0
255 00 FF
2
2
0
255 00 FF
3
3
0
255 00 FF
4
4
0
255 00 FF
0
8
15
16 131 10 83
132 139 84 8B 52%
5
5
140 181 8C B5 55%
182 189 B6 BD 71%
190 231 BE E7 75%
232 239 E8 EF 91%
240 247 F0 F7 94%
248 255 F8 FF 97% 100%
6
0
255 00 FF
7
0
255 00 FF
The LEDs of the device are arranged in the following order (see
graphic) and can be individually controlled with the following DMX-
protocol.
0%
100%
0%
100%
0%
100%
0%
100%
7
00 07
0%
3%
08 0F
3%
6%
6%
51%
55%
71%
74%
91%
94%
97%
0%
100%
0%
100%
S/
F
Vertical movement (TILT 1)
Push slider up in order to move the head 1 vertically
(TILT). Gradual head adjustment from one end of the
slider to the other. The head can be stopped at any
F
position you wish.
Vertical movement (TILT 2)
Push slider up in order to move the head 2 vertically
(TILT). Gradual head adjustment from one end of the
F
slider to the other. The head can be stopped at any
position you wish.
TILT speed
F
Decreasing speed
Dimmer intensity - channel 5 must not be set to
"blackout" (values 0-7)
Gradual adjustment of the dimmer intensity from 0 to
F
100 %
Strobe
S
Blackout
S
Open
F
Strobe-effect with increasing speed
S
Open
S
Fast open, slow close
S
Open
S
Slow open, fast close
S
Open
S
Random strobe-effect
S
Open
Red
F
Red 0 - 100 % increasing
Green
F
Green 0 - 100 % increasing
28/32
Feature
00103432, Version 1.0
Werbung
Inhaltsverzeichnis
