Herunterladen Inhalt Inhalt Diese Seite drucken

Inserting/Removing The Battery Pack; Checking The Battery Pack's Charging Level; Assembly; Fitting/Removing The Dust Box - Parkside Performance Pamsp 20-Li A1 Bedienungsanleitung Und Originalbetriebsanleitung

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 85
˜ Inserting/removing the
battery pack
Inserting the battery pack
1 . Push the battery pack 
handle 
.
[
3 ]
2 . Ensure the battery pack 
audibly in place .
Removing the battery pack
1 . Press the release button 
battery pack 
[
5 ]
2 . Pull the battery pack 
handle 
.
[
3 ]
˜ Checking the battery pack's
charging level
The charging level LEDs 
o
the charging level after the product is
switched on and off:
Colour
Red/orange/green Maximum
Red/orange
Red
˜ Assembly
˜ Fitting/removing the dust
box
(Fig. D, F)
WARNING! Risk of injury!
m
Always switch the product off,
remove the battery pack 
and let the product cool
down before making any
adjustments .
NOTE
The adapter for dust box 
u
installed on the dust box 
When working vertical surfaces:
u
The dust box
2 ]
[
downwards .
into the
5 ]
[
clicks
5 ]
[
on the
4 ]
[
.
from the
[
5 ]
display
7 ]
[
Charging level
Medium
Low
[
5 ]
is pre-
[
1 ]
.
[
2 ]
has to face
NOTE
For optimum dust extraction:
u
Empty the dust box 
Optional: The dust can be
u
extracted with a vacuum cleaner
(e.g. PWD 30 C1).
Fitting the dust box
1 . Fit the adapter for dust box 
the extraction outlet 
2 . Align
 
on the adapter for dust
1a ]
[
box 
with
on the dust box 
1 ]
[
3 . Locking: Rotate the dust box 
clockwise direction until
to .
Removing the dust box
1 . Rotate the dust box 
clockwise direction until
to .
2 . Remove the dust box 
adapter for dust box 
External dust extraction
1 . Remove the adapter for dust box 
from the extraction outlet 
2 . Connect the end of the hose coupler
to the extraction outlet 
Fitting the sand attachment
NOTE
A cross head screwdriver is
u
required for this step . This is not
included in the scope of delivery .
1 . Use a cross head screwdriver to
loosen the 4 screws 
previous sand attachment 
2 . Install the desired sand
attachment 
/
[
20 ]
3 . Use a cross head screwdriver to
tighten the 4 screws 
regularly .
[
2 ]
onto
[
1 ]
.
17 ]
[
.
2 ]
[
in
2 ]
[
 
points
[
1a ]
in anti-
[
2 ]
 
points
[
1a ]
from the
2 ]
[
.
[
1 ]
1 ]
[
.
[
17 ]
.
[
17 ]
from the
[
21 ]
/
/
[
20 ]
22 ]
[
[
23 ]
/
.
[
22 ]
[
23 ]
.
21 ]
[
GB
.
17
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

472728 2401

Inhaltsverzeichnis