Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Stand Alone operation
DMX Setup
DMX Address
With this function, you can adjust the desired DMX starting address.
Channel Mode
With this function, you can select the DMX channel modes.
Network
Control mode
With this function, you can set the control protocol (DMX or Art-Net).
IP mode
With this function, you can either set a fixed IP (Static) or a DHCP (Dynamic).
Artnet Universe
With this function, you can set the Universe.
IP address
With this function, you can set the IP address of the device.
Sub Mask
With this function, you can adjust the subnet mask of the device's IP address.
Personality
Tilt Inverse
With this function, you can reverse the TILT-movement.
Tilt Feedback
With this function, you can correct the TILT movement to the programmed position.
Dimmer Curve
With this function, you can select the dimmer curve.
LINEAR: the increase in light intensity appears to be linear as DMX value is increased.
SQUARE: light intensity control is finer at low levels and coarser at high levels
INVERSE SQUARE: light intensity control is coarser at low levels and finer at high levels
S-CURVE: light intensity control is fine at low levels and high levels and coarser at medium levels.
Dimmer Frequency
With this function, you can select the PWM (Pulse-width modulation) frequency of the LEDs.
Dimmer Speed
With this function, you can select the dimmer speed (step response).
No Data Mode
With the function, you can "Hold" the DMX value, the device is switched dark "Blackout", or is switched to
"Auto", the last set s
(1-6) if no DMX signal is received.
how program
38/48
00156531, Version 1.1
Werbung
