Herunterladen Diese Seite drucken

EuroLite LED PIX-12 Swing QCL Zoom Bar Bedienungsanleitung Seite 34

Motorisiert neigbare led-lichteffektleiste mit 12 hochleistungs-leds, zwei zoombereichen von 2 bis 28 und 164 effekt-leds

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operation via Art-Net
For use via appropriate lighting control software supporting Art-Net. The device can be configured via the
control panel.
To be able to operate the device in Art-Net mode, it must first be set to Artnet under the menu item
NETWORK => Control Mode (see Menu structure).
Data Connection
The device uses a RJ45 data connection for connection to a computer or a previous or subsequent device.
To link all data ports the wiring can be carried out according to the following two installation methods.
MENU
LED PIX-12
Swing Bar
ENTER
MENU
LED PIX-12
Swing Bar
ENTER
Interconnect the devices with network cables. The network ports can be used as inputs and outputs, as
desired.
Connect the first device in the chain to the computer's network card (optionally through a network switch)
with a network cable.
If needed, cables up to 100 meters long may be used (point-to-point connection provided).
Please refer to the instructions under Menu structure.
MENU
LED PIX-12
Swing Bar
LED PIX-12
Swing Bar
ENTER
MENU
LED PIX-12
Swing Bar
LED PIX-12
Swing Bar
ENTER
MENU
LED PIX-12
Swing Bar
LED PIX-12
Swing Bar
ENTER
MENU
MENU
LED PIX-12
Swing Bar
ENTER
ENTER
MENU
ENTER
MENU
ENTER
34/48
00156531, Version 1.1

Werbung

loading

Diese Anleitung auch für:

51930386