Thermalright Macho Direct Bedienungsanleitung Seite 6

Installation
Step 1:
Step 1 : Fan clips installaion
Take out Macho
color box. Pull both ends of the fan clip and
make them go through
of the heat-sink
Repeat for the other fan clip.
clips on the heat-sink
later on . Do not remove
step 3:
step 3 : 775 Back Plate cap
Note: When installing
the Back plate, make sure you have the Cap facing downwards.
platforms go directly to Step 4.).
Step 4:
Step 4 : Place the motherboard
holes around the processor
side with a washer is facing the Back Plate.
3
Instructions:
Direct Heat-sink from
holes on the corners
(as shown in the picture.)
Leave both fan
body for fan installation
them.
on a 775 platform,
1
on top of the Back Plate. See the four Screw Pillars go through the four
socket.Cap the four Screw Pillars with the four Screw Nuts.Make
Thermalright
step 2:
Step 2 : Backplate
the Choose the platform (775/1150/1151/1155/1156/1366)
you are in use. Make four M3LIO Screw Pillars go
through the Metal Back Plate and the Mylar film from
bottom towards top-And then place the Metal Back
Plate on the table. Put the four Washers (for Intel)
around the Screw
please first insert the Back Plate Cap into the opening
4
2
1366
775
o
O
Installation
Pillars.
(Only for LGA775 platform,
1150
1151
1155
1156
O
O
on
all other
sure the