Packing List - Moza R3 Racing Wheel And Pedals Bedienungsanleitung

Instructions for Adjusting the Height of the Pedal Plate
Use a 2.5mm hexagonal spanner to turn the screws on the face of the pedal plate counter-
clockwise and use a 7mm open-end spanner to remove the back nut from the
the plate screws, move the plate up and down to adjust the plate height according to your
needs, then tighten the nuts and screws until they fit the plate and fix it (the plate is adjusted
in the same way for the throttle, brake and clutch)
Specs
Pedal Material: High Strength Steel
Pedal Plate Material: High Strength Steel
Color: Black
Sensing Method: Hall Sensor
Pedal Spacing: Adjustable
Pedal Plate Height: Adjustable
Pedal Travel Software Adjustment: Supported
Pedal Travel Reversal Function: Supported
Pedal Output Curve: Supported
Anti-slip Pedal Pad: Supported

Packing List

04
· R3 DD Base
· ES Steering Wheel
· SR-P Lite Racing Pedals
· 15 Degree Desk Clamp
· Power Adapter
· Power Cord
· Wire Harness x2
· Screws (multiple sizes)
· Spanners (multiple sizes)
· Nuts
12
· Cable Clip
· Anti-slip Silicon Pad x2
· M6 Flat Pad x4
· Moza Logo Stickers