Moza R3 Racing Wheel and Pedals Bedienungsanleitung Seite 13

3. Connect one end of the RJ45 cable to the Wheel Base port on the pedal and the other
end to the Pedal port on the wheelbase.
4. The working status of the pedal can be seen in the MOZA Pit House. (If the unit is still grey
or does not respond when pressed, unplug the base, close MOZA Pit House, reconnect the
base and open Moza Pit House)
5. In addition to recalibrating the pedal, you have the option to adjust the starting point,
ending point, and travel distance of the pedal to suit your preferences in the MOZA Pit
House.
Pedal Spacing Adjustment Instructions
Move the pedal left and right to adjust the distance between the pedal and the base holes,
align the holes and tighten the screws, (the same for the throttle, brake and clutch)
11