Hofmann RF485MDBG-BI/HF Betriebsanleitung Seite 57

Maintenance
Normal phenomena
Button failure
Please check the control board whether the fridge under lock mo. dW e hen under lock mode,
all buttons can't work.
Low voltage,the compressor can't start
You should purchase pressurizer of more than 1000W when the area of the appliance
installation,that's better to protect your fridg.e
Long time to start
.ce
When the ambient temperature too high, it will take long time to start the applian
Middle beams feel hot
Middle beams feel hot after a period of time of the appliance ru ,int belongs to the normal
phenomenon.
Dew drops
When external air flows into the cool inner surface of the frid, gd e ew drops can be formed.
If the humidity of the installed location is high or during the rainy seas,odnew drops can
form on the outer side of the fridg.eThis is a natural phenomenon that occurs during the
humid weather,Wipe the water drops with a dry clot. h
Noise
When you operate the fridge for the first tim,ethe fridge will operate at high speed to cool
fast and the sound can seem loude.rWhen the internal temperature falls below a certain
level,the noise will subside.
When the operation of the compressor is starting or endin ;v g arious parts expanding/
contracting or various control devices operating or temperature change within the fri, dygoeu
will hear the sounds,these are normal sounds.
Compressor hot
When working,the temperature of the compressor outer is more than 80℃,please do not
touch the compresso,rit may cuase serious injury.
Compressor long time running
When the ambient temperature too high or put too much fresh foods into the frid,gite will
take long time to cool down until the appliance run at the setting temperature.