Hofmann RF485MDBG-BI/HF Betriebsanleitung Seite 44

Product Installation Instructions
Warning
To avoid danger caused by unstable appliance installation, follow the installation requirements in the manual.
The refrigerator illustrations in the installation steps are for reference only;
please refer to the actual product you purchased.
1.Before pushing the refrigerator into the cabinet, pull the power cord through the
power cord hole on the side panel or top panel to provide separate power on/off.
2.Push the refrigerator parallel into the cabinet;
3.Adjust the alignment and gap between the refrigerator and the cabinet:
1) There are two adjustable feet on both sides of the front bottom of the refrigerator.
Insert a flathead screwdriver into the groove of the adjustable foot and rotate clockwise to
raise the front of the refrigerator, or counterclockwise to lower it. By adjusting the two feet,
achieve a smooth alignment between the refrigerator door and cabinet surface, and even
gaps between the left and right sides of the refrigerator and the cabinet.
2) If the gaps between the refrigerator and the cabinet on the left and right sides are
uneven, slightly move the refrigerator to achieve uniform gaps.
※The appearance and specificaa ons of the actual oduct may differ depending on the model.
Power Cord Hole
Adjustable feet