Hofmann RF485MDBG-BI/HF Betriebsanleitung Seite 47

Product Installation Instructions
For stationary appliance
Installation dimension
Product Introduction
Select a good location to place your appliance where it is flat and easy to use.Avoid placing the unit near heat
sources,direct sunlight or moisture.
placing the unit near heat sources,direct sunlight or moisture.
Where to install your unit
≥5mm
≥2mm
≥1.5mm
※The appearance and specificaa ons of the actual oduct may differ depending on the model.
The refrigerator must be placed on hard , flat ground ;
if cushioning is neede,d stable , hard , nonflammable cushion
blocks shall be used .
DO NOT USE THE FOAM PACKAGING AS CUSHIONING BLOCKS!
The unit shall be kept away from damp locations where water is
presen.tWater or dirt should be removed from any surface of the
unit as soon as possible using a soft cloth. This will help prevent
rust and will help your unit run at peak efficiency.
Place the refrigerator in a well -ventilated plac,e reserve a certain
space around and behind the refrigerator , and do not cover or block
the air grille on the rear cover plate of compressor at the back of
refrigerato;r Keep the refrigerator away from heat source or direct
sunligh.t