Canceling The Display Demonstration; Setting The Clock - JVC KD-DB711 Bedienungsanleitung

Canceling the display
demonstration
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON]—see page 23.
1
2
3
4
Finish the procedure.
To activate the display demonstration
In step 3 above...

Setting the clock

1
2
Set the hour, minute, and clock
system.
1 Select "CLOCK H" (hour), then
adjust the hour.
2 Select "CLOCK M" (minute),
then adjust the minute.
3 Select "24H/12H," then select
"24H" (hour) or "12H" (hour).
3
Finish the procedure.
To check the current clock time when the
power is turned off
7