JVC KD-DB711 Bedienungsanleitung Seite 23

Indications
DEMO
Display demonstration
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
24H/12H
24 hours or 12 hours time
display
CLK ADJ
Clock adjustment
AF-REG
Alternative frequency/
regionalization reception
PTY-STBY
PTY standby
TA VOL
Traffic announcement
volume
P-SEARCH
Programme search
Selectable settings, [reference page]
DEMO ON: [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [7].
DEMO OFF: Cancels.
0 – 23 (1 – 12), [7]
[Initial: 0 (0:00)]
00 – 59, [7]
[Initial: 00 (0:00)]
12H O 24H, [7]
[Initial: 24H]
AUTO:
[Initial]; The built-in clock is automatically adjusted
using the CT (clock time) data in the RDS signal.
OFF:
Cancels.
When the received signals from the current station become weak...
AF: [Initial]; Switches to another station (the programme
may differ from the one currently received), [13].
• The AF indicator lights up.
AF REG: Switches to another station broadcasting the same
programme.
• The AF and REG indicators light up.
OFF: Cancels (not selectable when "DAB AF" is set to "AF
ON").
Activates PTY Standby Reception with one of the 29 PTY codes,
[13].
OFF [Initial] = 29 PTY codes, [11] = (back to the beginning)
[Initial: VOL 20]; VOL 00 – VOL 30 or 50*
* Depends on the amplifier gain control.
ON:
Using the AF data, the receiver tunes in to another
frequency broadcasting the same programme as the
original preset RDS station is if the preset station
signals are not sufficient.
OFF: [Initial]; Cancels.
Continued...
23