Safety in the workplace
a) Make sure the workplace is orderly and well lit. A messy or poorly lit workplace may lead to
accidents. Try to anticipate what may happen, observe what is going on and use common
sense when working with the device.
b) Do not use the device in an explosion hazard zone, for example in the presence of flammable
liquids, gasses or dust. The device generates sparks which may ignite dust or fumes.
c) Upon discovering damage or irregular operation, immediately switch the device off and
report it to a supervisor without delay.
d) If there are any doubts as to the correct operation of the device, contact the manufacturer's
support service.
e) Only the manufacturer's service point may repair the device. Do not attempt any repairs
independently!
f) If a fire starts, use solely powder or carbon dioxide (CO2 ) fire extinguishers suitable for use
on live devices to put it out.
g) Children or unauthorized persons are forbidden from entering a work station. (A distraction
may result in a loss of control over the device). h) Use the device in a well-ventilated space.
h) Regularly inspect the condition of the safety labels. If the labels are illegible, they must be
replaced.
i)
Please keep this manual available for future reference. If this device is passed on to third
parties, the manual must be passed on with it.
Remember! When using the device, protect children and other bystanders.
Personal safety
a) Do not use the device when tired, ill or under the influence of alcohol, narcotics or
medication which can significantly impair the ability to operate the device..
b) The device is not designed to be handled by persons (including children) with limited mental
and sensory functions or persons lacking relevant experience and/ or knowledge unless they
are supervised by a person responsible for their safety or they have received instructions on
how to operate the device.
c) When working with the device, use common sense and stay alert. Temporary loss of
concentration whilst using the device may lead to serious injuries.
d) To prevent the device from accidentally switching on, make sure the switch is on the OFF
position before connecting to a power source.
e) The device is not a toy. Children should be supervised so that they will not play with the
device.
f) Note: The metal parts of the lid and the housing may be hot and may cause skin burns.
EN