Neonate BC-5800D Bedienungsanleitung Seite 9

Parent unit: Press the (•) button once more.
5
The parent unit will return to standby mode.
The upper and lower temperature limits are
now adjusted/defined.
NOTE: Both the upper and lower temperature
limit can be turned off completely. The upper
temperature limit can be turned off by pressing
the (+) button until the temperature limit is set
at +50°C, and then pressing the (+) button once
more. The lower temperature limit can be turned
off by pressing the (-) button until the tempera-
ture limit is set at -19°C, and then pressing the
(-) button once more (OFF will appear in display
instead of selected temperature limit).
Adjusting the speaker volume on parent unit
Parent unit must be turned on.
Parent unit: Use the (+)/(-) buttons to adjust
1
the volume. The volume bar graph at the
bottom of the display will be adjusted at
the same time to show the current speaker
volume. When volume is turned all the way
down (volume = OFF) display is showing
HIGH
LOW
Adjusting the microphone sensitivity of the
baby unit
The baby unit must be turned on.
Baby unit: Use the (+)/(-) buttons to adjust
1
the sensitivity of the microphone. The MIC
SENS bar graph at the bottom of the display
will be adjusted at the same time to show
the current microphone sensitivity. When
sensitivity is turned up, lower sounds are
detected easier. When the sensitivity is
turned down, the sound has to be louder for
the microphone and thereby the baby unit to
be activated.
VOX
9