Miele Complete C3 Electro Gebrauchsanweisung Seite 29


Ensure that the connection data on the data plate of the
vacuum cleaner (voltage and frequency) match the mains
electricity supply exactly. The vacuum cleaner is suitable
for use with 50 Hz or 60 Hz without modification.

The mains electrical plug must be fitted with an appro-
priate fuse.

Reliable and safe operation of this vacuum cleaner can
only be assured if it has been connected to the mains elec-
tricity supply.

The socket on the vacuum cleaner (depending on
model) must only be used for the Miele Electrobrushes lis-
ted in these operating instructions.

The Miele Electrobrush is a motor driven accessory for
use only with Miele vacuum cleaners. For safety reasons,
the cleaner must not be used with an Electrobrush pro-
duced by another manufacturer.

While the vacuum cleaner is under warranty, repairs
should only be undertaken by a Miele authorised service
technician. Otherwise the warranty will be invalidated.

Do not use the vacuum cleaner if the cable is damaged.
If the cable is damaged it must be replaced together with a
complete cable rewind. For safety reasons this must only
be done by Miele Service or a Miele authorised service
technician.
en - Warning and Safety instructions
29