Bosch Indego Originalbetriebsanleitung Seite 32

32 | English

Ensure correct installation of the pe-
rimeter wire as instructed.

Check the perimeter wire is fully
pegged to the ground avoiding any
slack lengths of wire.
 Periodically inspect the area where
the machine is used and remove all
stones, sticks, wires and other for-
eign objects.

Do not run any live mains cables in
the working area.

Periodically inspect to see that the
blades, blade bolts and cutter assem-
bly are not worn or damaged. Replace
worn or damaged blades and bolts in
sets to preserve balance.

Never operate the machine with de-
fective guards or without safety de-
vices.

Do not put hands or feet near or un-
der rotating parts.
 Never pick up or carry the machine
while the motor is running.

Do not leave the machine to operate
unattended if you know that there are
pets, children or people in the imme-
diate vicinity.
 Start the machine according to the in-
structions standing well away from
rotating parts.

Do not use the product at the same
time as a sprinkler or use the sched-
ule to ensure that the two systems
never run simultaneously.
 Do not modify this product. Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
F 016 L81 115 | (7.10.14)
Remove the isolator key:
– Before clearing a blockage,
– Before checking, cleaning or working
on the machine,
– if the machine vibrates abnormally
(stop and check immediately),
– after striking a foreign object. Inspect
the machine for damage and get ad-
vice on necessary repairs from your
Bosch Service Centre.
Maintenance

Always wear gardening gloves
when handling or working near the
sharp blades.
 Before working on the machine it-
self, remove the isolator key.
 Before working on the docking sta-
tion or power supply, remove plug
from mains.
Clean the exterior of the machine thor-
oughly using a soft brush and cloth. Do
not use water, solvents or polishes.
Remove all grass and debris, especially
from the ventilation slots.
Turn the machine on its back and clean
the blade area regularly. Use a stiff
brush or scraper to remove compacted
grass clippings. (see figure A)
Blades are reversible. (see figure B)

Keep all nuts, bolts and screws tight
to be sure that the machine is in safe
working condition.
 Periodically visually inspect the ma-
chine and replace worn or damaged
parts for safety.
 Ensure that only official Bosch re-
placement parts are used.
Bosch Power Tools