Troubleshooting - Bosch Indego Originalbetriebsanleitung

44 | English
Schedule Info
Schedule Info
Back
Change Schedule
Lock Controls
Lock Controls
Unlock Controls

Troubleshooting

Online Support
http://www.bosch-indego.com
Problem Possible Cause
Machine fails to Possible clogging
operate
Battery not fully charged
Grass too long
Battery too hot/cold
Isolator key not inserted correctly/fully
Motor starts and Battery not fully charged
stops immediately
Isolator key not inserted correctly/fully
Battery too hot/cold
Machine functions Possible internal fault
intermittently
Machine leaves Height of cut too low
ragged finish
Cutting blade blunt
Possible clogging
Areas left uncut Time slot not long enough for garden size
Battery duration
Distance between obstacles surrounded by
perimeter wire is less than 1 m
Rough lawn conditions
Excessive vibra- Blade nut/bolt loose
tions/noise
Cutting blade damaged
F 016 L81 115 | (7.10.14)
Explanation
Overview of programmed mowing days.
Return to Menu.
Enter submenu "Select Daily Timer".
Explanation
To lock buttons immediately, independent from Auto-Lock.
To unlock buttons the entry of the PIN code is required.
Corrective Action
Check underneath the garden product and clear out as
necessary (always wear protective gloves)
Replace garden product in the docking station
Increase height of cut
Allow to cool/warm
Fit correctly
Replace garden product in the docking station
Fit correctly
Allow to cool/warm
Increase height of cut
Contact your Bosch Service Centre
Increase height of cut
Replace the blade
Check underneath the garden product and clear out as
necessary (always wear protective gloves)
Increase mowing time slot
Contact your Bosch Service Centre
Increase distance between perimeter wire
Note: Obstacles with a height of more than 6 cm do not
require to be wired
Increase/decrease cutting lane proximity from "mow set-
tings"
Tighten blade nut/bolt
Replace the blade
Bosch Power Tools