Note - Time settings
• If there are reception problems, we recommend
leaving the clock to sit overnight, since
interference is generally less at night.
• In the meantime, you can start a manual search
for the DCF radio signal at another location or you
can manually set the time and date.
• The clock automatically continues to search for
the DCF signal every hour. If the signal is received
successfully, the manually set time and date are
overwritten.
5.2. Alarm
Setting the alarm time
• Repeatedly press the MODE button (11) to access
alarm mode 1 (ALM1) or 2 (ALM2).
• Press and hold the MODE button (11) to set the
alarm time (8) for the alarm displayed. The hours
display begins to ash.
• Press the button (13) or the button (12) to
select the hour for the alarm time and con rm your
selection by pressing the MODE button (11). The
minutes display begins to ash.
• Repeat the process to set the minutes for the
alarm time.
• Press the MODE button (11) repeatedly to also set
the other alarm mode or return to the temperature
display.
Activating/deactivating the alarm
• Press the ALARM button (9) repeatedly to activate/
deactivate alarm 1 or alarm 2.
• If an alarm is activated, the corresponding symbol
/
will be displayed.
1
2
Stopping the alarm/snooze function
• If the alarm is triggered, the alarm symbol
will begin to ash and an alarm will sound.
• Press the ALARM button (9) to stop the alarm.
Otherwise, it will stop automatically after 4 minutes.
4
Note - Snooze function
While the alarm signal is sounding, press the LIGHT-
SNOOZE button (1) to activate the snooze function.
The alarm symbol (7)
ash. The alarm signal will be stopped for 4 minutes,
after which it will sound again.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents. Make
sure that water does not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or
from failure to observe the operating instructions and/
or safety notes.
8. Technical Data
RC 200 radio-controlled alarm clock
Power supply
Measuring range
Temperature
9. Declaration of Conformity
of the EU declaration of conformity is available at the
following internet address:
https://support.hama.com/00186331
/
1
2
Frequency band(s)
Z
/
and
1
2
2 x AAA batteries
0°C – +50°C
32°F – 122°F
Hereby, Hama GmbH & Co KG
declares that the radio equipment
type [00186331] is in compliance with
Directive 2014/53/EU. The full text
Z
will begin to
3.0 V
77,5 kHz