FRIATEC Friatools FWSG RA Serie Bedienungsanleitung Seite 16

EN
8. Replacement
The blade of your scraper tool FWSG RA is characterized
type of tool to one of the front sides with "25", "32/40"
two cutting edges. At delivery the blade is installed by default that you can see
the dimension.
in use. Is this cutting edge worn, a new blade must be used.
Insert a new blade always a way that the dimension
CAUTION!
Risk of injury at the blade!
• Loosen the countersunk
• Turn the blade
• Fasten the
torque: 3 Nm.
NOTICE
Please note when replacing
to following
Replacement
FWSGE 10 for
FWSGE 11 for
FWSGE 13 for
16
of blade
If no identification
screw
1800 clockwise.
countersunk screw
the blade that only a replacement
table is used!
Blade Set
FWSG RA 32 and
FWSG RA 50 and
FWSG RA 25
is visible, the second cutting edge is already
with a TorxPlus
with a TorxPlus IP15
40
63
according
or "50/63".
is legible.
IP15 wrench.
wrench. Maximum
blade according
Order.
613329
613330
613332
to the
It has
Ref.