Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Scraping
5.
Manual
5.1
• Hold the scraper tool FWSG RA at the base body (7) and turn the tool
clockwise
• Press the scraper tool FWSG RA axially against the pipe end to be scraped.
• Scrape until the pre-marked
• The swarf is to be removed manually.
NOTICE
Drilling
machines
Too many rotations
CAUTION!
Risk of injury during
Ensure
not to contact
14
of pipe surface
scraping
around the pipe end.
5.2 Scraping
• Insert the external hexagon bolt of the crank handle into
the adapter at the knob (1).
• Turn the scraper tool FWSG RA evenly clockwise
the pipe.
• Press the scraper tool FWSG RA axially against the pipe
end to be scraped.
• Scrape until the pre-marked
completely
• The swarf is to be removed manually.
5.3 Scraping
• Cordless screwdrivers
be used exclusively:
• Maximum
• Maximum torque: 4 Nm.
• The impact-screw
may not be used!
per minute can lead to an inadequate
scraping
the
rotation
surface of the pipe end is completely
with crank handle
scraped.
with cordless
with the following features may
number of revolutions
function
process!
area
of the
FWSG
(accessory)
surface of the pipe end is
screwdriver
per minute: 200 rpm
must be deactivated.
scraping
result!
RA.
scraped.
around
Werbung
