Stadler Form Roger Gebrauchsanweisung Seite 10

10. If you are bothered by the brightness of the LEDsand the air quality
indicator (7) (in a bedroom,for example),you can switch these off by
pressing the button for night mode (11)once. The controls cannot be
switched off completely,but go out automatically after 10secondswith-
out input
Press the button for night mode again to return to normal mode.
11. Above the button for HEPAreset (12),four LEDsindicate the life spanof
the Dual FilterTM (2). If all four LEDsare flashing, the DualFilter Mmust
be replaced Resetthe timer for the Dual Filter by pressingand holding
the button for HEPA reset (12)(for about 3 seconds).If all 4 LEDslight up
continuously,the timer has beensuccessfullyreset
12. Pressthe WiFi button (13)to connect Roger/Rogerbig to the "Smart
Life —Smart Living" App von Tuya Inc. (availablein the App Store and
via Google Play) on your smartphone.The illuminated LEDabove the
WiFi button indicates the connection between Roger/Rogerbig and
your smartphone. You can control all the functions of the appliance via
the app and monitor the air quality in real time, even when you are not
at home. Formore detailed information on how to connect your Roger/
Roger big to your smartphone,see the enclosed „WiFi —Quick Setup
Guide".
Cleaning and filter exchange
Prior to any maintenance, cleaning and after each use, switch off the appli-
anceand unplugthe mainscable (4)from the socket.Toaccessthe various
filters, please referto Point 1 of "Setting up / operation"
Attention: Never submergethe appliancein water (dangerof short-circuit).
• When cleaningthe outside, rub the non-textile parts of your appliance
with a dampcloth andthen dry thoroughly.
• The textile pre-filter (1)must be cleaned regularly,once a month depen-
ding on the level of soiling, using the textile brush attachment for your
vacuumcleaner.In the case of heavy soiling, the textile pre-filter (1)can
also bewashed in a washing machine.The antimicrobialprotection provi-
ded by Sanitized@is guaranteed for at least 20 washes. Allergy sufferers
are recommended to wash the textile pre-filter oncea monthandall other
users every 3 months.
• Thetextile pre-filter will needto beremovedfrom its plastic frame before
it can bewashedin awashing machine.In orderto dothat, all the material
will needto be removedfrom the two positioning aids, the two pin, the
4 tabs and the two corner tabs at the top. The textile pre-filter can be
washed at 300 on a gentle cycle. Let the textile pre-filter (1) dry com
pletely before attaching it to the applianceagain. To do that, stretch the
materialoverthe plastic part sothat the washinglabel is at the top andon
the inside.All openingsinthe materialto bethreadedthrough are marked
with bright-colouredthread. In addition, the materialshouldbe lifted over
the two corner tabs at the top of the appliance. Caution: Never put the
textile pre-filter, filter or other parts of the housingin the dishwasher!
• The Dual FilterTM (2) cannot be cleanedand must be replacedafter 8—12
months. If all four LEDs flash above the button for HEPA reset (12), the
filter mustbe replaced.Shouldyounotice that badodorsare nolongerbe-
ing released,this is also an indication that the filter needsto be changed