Herunterladen Diese Seite drucken

HOMCOM 820-083 Bedienungsanleitung Seite 4

Vorschau ausblenden Andere Handbücher für 820-083:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
● The control switch at the OFF position when first operation.
● Rotate control switch clockwise through the three settings.
● Switch on electricity supply to the heater and flame effect at ON position.
● Switch on low heat setting at 900W position.
● Switch on high heat setting at 1800W position.
● Rotate control switch anticlockwise to switch off the settings accordingly.
● This heater has a adjustable thermostat to set desired room temperature. Rotate
clockwise or anti-clockwise to achieve desired room temperature setting.
Note: The thermostat is located on the back of the heater.
820-086/820-087/820-178/820-299V90:
The following switches are located at back of the heater.
Insert plug into mains socket
Select the desired functions:
● Switch 2 (O/I ) Switchs on/off electricity supply to the heater and flame effect
● Note: This switch must be in the ON (I) position for heater to operate with or without heat
● Switch 3 ( I ) Switchs on/off 1000W heat output
● Switch 4 ( II ) Switchs on/off 2000W heat output with switch 3.
● Note: The flame effect can be operated with or without heat.
Rotate thermostat knob (1) clockwise or anti-clockwise to increase or decrease desired
room temperature setting.
Safety Cut-Off
This appliance is fitted with a safety cut-off which will operate if the heater overheats (e.g.
Due to blocked air vents). For safety reasons, the heater will NOT automatically reset. To
reset the appliance, disconnect the appliance from the mains supply for at least 15
minutes. Reconnect the supply to the mains and switch on the appliance.
4

Werbung

loading