Touratech R1150GS Anleitung Seite 6

TOURING RALLYE RACING TECHNOLOGY
Januar 2004
Xenon (HID) Hi-Beam R1150GS
09-040-4601-1
Installation Instructions
Figure 15 shows the ballast power input connected to
original high-beam output.
15
Screw the headlight unit back on with the supplied bolts
and black plastic spacers. Make sure not to cross thread
the bolts.
At this point you can adjust the xenon beam with the
adjustment bolts
Secure the xenon cable with zip ties on the center piece of
the support frame so that it does not interfere with steering
and does not make sharp bends.
The supplied triangular aluminium plate is not needed in
this application.