Touratech R1150GS Anleitung Seite 3

TOURING RALLYE RACING
09-040-4601-1
Xenon (HID) Hi-Beam R1150GS
9. Put the supplied long adjustment bolts from the rear,
phillips end first, thru the openings in these three corners
only of the xenon light housing as shown.
8
9. Now carefully turn the plastic piece until the tongue
engages in the recess on the back side of the unit. You
might need to use pliers and oil lubrication on the surface
because the plastic piece does not turn lightly and it is
rather fragile.
9
10. Push the adjustment bolts of the xenon housing from
the rear thru the holes on the mounting brace. Now press
the provided black plastic mounting pieces split end first
onto the screws. Make sure the parking light is positioned
at the bottom.
10
TECHNOLOGY
Januar 2004
Installation Instructions