Touratech R1150GS Anleitung Seite 2

TOURING RALLYE RACING
09-040-4601-1
Xenon (HID) Hi-Beam R1150GS
Installation Instructions
5.+6 Unscrew the two mounting bolts on both sides of the
5
headlight brace, pry the ball joint downward (fig. 6) with a
flat head screw driver and pull the headlight unit out.
Disconnect high beam, low beam and parking light
connectors on the back of the unit but make sure you to
mark which one is low and which one is high beam
connector.
6
7. Loosen the attachments of the high beam by turning
(might need to use pliers) and remove the original high
beam unit.
7
TECHNOLOGY
Januar 2004