Programming A Cooking Time With A Delayed Start - Scholtes FX 35.2 XA Bedienungsanleitung

2.

Programming a cooking time with a delayed start

The oven can be programmed so that the dish is ready at a given time: the programmer automatically determines
the cooking start time and the oven is turned off at the desired time.
For example
It is 9:00 a.m. and you want the dish to be ready at 12:30 knowing that cooking should last 1 hour and 15 minutes:
then the cooking time and end cooking time are set. The oven will automatically calculate that cooking should start
at 11:15 a.m. for cooking to end at 12:30 p.m..
Step 1
Place your dish in the oven and select a cooking mode. Adjust the temperature if necessary and set a cooking time,
as follows:
1. Turn knob A to light symbol
2. press knob A to access the adjustment of the cooking time: 2:00 flashes on the display;
3. turn knob A to set the desired cooking time (a minimum of 2 minutes - a maximum of 9h59);
4. press knob A to confirm the programming. The cooking time will be displayed alternately with the desired
temperature.
Step 2
Set the desired end cooking time:
1. Turn knob A to light symbol
immediately);
2. press knob A to access the adjustment of the desired end cooking time;
3. turn knob A to set the end cooking time.
4. press knob A to confirm the programming. The end cooking time will be displayed alternately with the desired
temperature.
Cooking will start at 11:15 a.m. and will stop at 12:30 p.m..
The displaying of the word "end", accompanied by a sequence of acoustic signals, indicates that the programmed
cooking time is up and the cooking is stopped.
• Press knob A to silence the acoustic signals.
• Turn knob B back to position 0 to remove the word "end" from the display.
Programming
;
(the display indicates 10h15, i.e. the end cooking time, if the cooking starts
STOP
- 8 -