Herunterladen Inhalt Inhalt Diese Seite drucken

Weber Rescue Systems STABFAST ALU+ Bedienungsanleitung Seite 14

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
IMPORTANT
The owner of the system must ensure that the STABFAST
understood these instructions for use. In order to ensure safe and effective use of the STABFAST
important to regularly familiarise yourself with the use and operation of the system. All valid health and safety regulations must
be taken into account when using the STABFAST
STABFAST
ALU+ stabilisation system.
TM
Technical specifications
Stabiliser strut
Collapsed length:
Collapsed length:
Maximum extended length:
Maximum extended length:
Weight:
Weight:
Maximum load in longitudinal direction of strut (vertical):
Straps
Length of yellow, green and blue strap:
Length of yellow, green and blue strap:
Maximum load:
Finger hook
Finger hook
Finger hook
Maximum load:
Maximum load:
Adjustable wedge
Length x width:
Length x width:
Height adjustable:
Height adjustable:
Weight:
Weight:
Maximum load:
Maintenance and inspection After every use
Whole system
Clean with a soft brush and a dry cloth. Inspect visually for damage.
Straps
There is no max. lifetime for the straps. They only must be replaced if they're damaged:
- Cuts or yarn breaks of more than 10 percent of the strap cross-section
- Edge cuts and notches
- Cuts across the entire width of the belt
- Damaged seams or damage to the other connecting elements
- Heat-induced deformation of the belt webbing
- Damage caused by aggressive substances such as chemicals
- Non-existent / illegible identification label
Hook blade
Sharpen point if necessary.
Maintenance and inspection Every three months
Whole system
Treat moving parts with silicon spray (as regards the pneumatic cushioning – introduce a few drops of lubricating oil via the telescope).
Maintenance and inspection Annually
Stabiliser struts, wedge and straps
Have checked in accordance with valid regulations for checking lifting and hoisting gear.
Replace all damaged and defective parts immediately with original parts. Treat corrosion immediately.
14
Stabilisation
ALU+ stabilisation system is only used by persons who have read and
TM
ALU+ stabilisation system. Keep these instructions for use together with the
TM
systemSTABFAST
ALU+ stabilisation system, it is
TM
1.050 mm
1.050 mm
1.720 mm
1.720 mm
7.5 kg
7.5 kg
1.750 kg
5,5 m
5,5 m
20 kN
25 kN
25 kN
60 x 10 cm
60 x 10 cm
6 - 20 - 27 cm
6 - 20 - 27 cm
4 kg
4 kg
7.5 kN
+
ALU
TM

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis