How To Use Control Panel; Voice Function; How To Use Voice Control - Donnerberg Lexa Originalbetriebsanleitung

How to use control panel

How to use voice control

• Press this button for 3 seconds to activate
the voice control function. You will hear the
welcome message in German�
• Say "Hallo Lexa" to start using the voice con-
trol�
• To change the language short press the voice
control button until you hear a welcome
message in the preferred language�
• Once you receive the reply, continue by saying
the command which corresponds to the desired
massage mode (Please refer to the voice
commands list on the previous page)�
• Each mode is controlled by the voice control
function and is displayed on the remote control.
• If you want to deactivate the voice control
function, long press the voice control button for
3 seconds�
Note:
• Please pronounce the command clearly in a standard voice�
• The default language upon activation is German.
• The order of the languages is: German, English, Italian, French, Spanish.
• After selecting a new language, you will hear the welcome message in the chosen language.
• The voice control will remain on standby after activation, waiting for your commands.
• Please speak your command within 10 seconds�
• If no command is issued within 10 seconds, re-activate the voice control by saying "Hello Lexa" in the chosen language again.
• To change the massage mode, say "Hello Lexa" and the specific command.
• To improve recognition accuracy, direct your head to the right while speaking the command, as the microphone is positioned on
the right side�
• While in swing mode with music playing, voice control is temporarily disabled� To access other commands, users can choose any
other massage mode button on the remote control and then activate the voice function. For a partial massage, simply press the
manual massage button on the remote and the preferred body part.
• When the music is activated via Bluetooth, voice control is also temporarily disabled.

Voice Function

Massage Time Adjustment
Back Rollers Up
Back Rollers Down
ON/OFF Button
USB Charger
1. Activate voice control: Press this button for 3 seconds to
activate the voice control function.
You will hear the welcome message in German�
Say "Hallo Lexa" to start using the voice control�
Change the language: To change the language short press the
voice control button until you hear a welcome message in the
preferred language�
2. Adjust the duration of your massage.
3. To raise the back rollers, long press this button.
4. To lower the back rollers, long press this button.
5. Turn On /Off massage and start with Auto mode 0 after
scanning�
6� USB charger�
27