NOTE:
- Spray/moisten surfaces first and then vacuum. Do not use the appliance to vacuum up dry dirt.
- Test an inconspicuous area of your fabric to see whether it is suitable for damp cleaning.
- Do not over-moisten the fabric / upholstery. The more water penetrates the upholstery, the longer the drying
process will take. There is a risk of mould growth if the upholstery is too wet.
- If you have added a cleaning agent to the fresh water, we recommend cleaning the affected area again with clear
water to avoid residues of the cleaning agent in the upholstery.
Storage
Store the product in a protected, dry place out of the reach of children.
Wrap the mains cable around the cable storage unit.
After cleaning/drying, wrap the hose around the lower part of the appliance and secure the end in the holder provided.
Cleaning and user maintenance
WARNING!
RISK OF ELECTRIC SHOCK
Switch the appliance off and disconnect it from the mains before cleaning or user
maintenance.
Never hold the appliance under running water or immerse it in water or other liquids.
NOTE!
DANGER OF DAMAGE!
Improper handling of the appliance may result in it being damaged.
Make sure that all parts, especially the hose and the water tanks, are completely dry before reassembling the
appliance after cleaning.
1. Clean the appliance by wiping it with a dry or slightly damp cloth. Do not use aggressive cleaning agents, brushes
with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These
may damage the surfaces.
2. Remove and clean both tanks, the hose and the nozzles used after each use (see the following points for more details).
Cleaning the hose
1. Remove the universal nozzle from the hose.
2. a) Place the hose cover on the end of the hose, switch on the appliance and press the spray button to rinse the hose.
OR
b) Hold the end of the hose in the fresh water tank and switch on the appliance. Clean water will be sucked in to
rinse the hose.
3. Allow the hose to dry.
Instruction manual
GB
19