Use; Storage; Cleaning And User Maintenance; Emptying/Cleaning The Dust Container - Genius Invictus C9 Gebrauchsanleitung

GB

Use

1. Connect the vacuum cleaner to a working power socket. Do not wrap the cable around the device during use.
2. Press the on/off button on the main appliance to switch on the vacuum cleaner. The device automatically starts in
standard mode (see fig. A).
3. You can increase or decrease the suction power by pressing the mode button (see fig. B).
The vacuum cleaner can be used with or without a bag. Simply use without a bag or insert a standard plastic bag
„
(2.5 - 4 litres) into the dust container.
For use with a bag:
„
1. Remove the cover by releasing the fastening clips on the side and pulling the cover upwards by the handle (see fig. C).
2. Insert an undamaged plastic bag into the dust container and press the bottom of the bag into the bottom of the
dust container.
3. Pull the bag over both noses of the dust container. Do not pull over the flap in the middle of the noses (see fig. D).
4. Pull the rest of the plastic bag through the fastening on the other side so that the bag sits tightly in the dust container
(see fig. E).
5. Fit the cover and close the fastening clips on both sides. This secures the plastic bag in place.
6. Remove the plastic bag after cleaning and dispose of it.

Storage

1. Empty the dust container.
2. Allow the device and accessories to dry completely before storing.
3. Store the device in a protected, dry place out of the reach of children.

Cleaning and user maintenance

WARNING!
Risk of electric shock
Switch the appliance off and disconnect it from the mains before cleaning or
user maintenance.
Never hold the appliance under running water or immerse it in water or other liquids.
Clean the appliance by wiping it with a dry cloth.
„
Do not use harsh or abrasive cleaning agents or cleaning pads.
„
The accessories can be wiped with a damp cloth if necessary.
„
Quick Clean
1. Make sure that the dust container is not filled up to the mark (wet max fill). Empty it before cleaning if necessary.
2. Put a few drops of washing-up liquid and approx. 250 ml of water in a container.
3. Suck up the mixture with the hose.
4. Disconnect the vacuum from the power supply and empty the dust container.

Emptying/cleaning the dust container

1. Open the side fastening clips and remove the cover.
2. Remove the dust container.
18
Instruction manual