Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Exhaust air filter / Hepa filter:
Pull up the ventilation grille removal tab and remove the ventilation grille.
Pull the exhaust air filter behind it forward out of the holder.
Tap out any remaining dust or use a small, soft brush.
If necessary, rinse with clean water.
Allow the filter to dry thoroughly before putting it back into the device.
Replace the ventilation grille.
Please note:
Do not use any cleaning agents for cleaning.
-
Allow the filters to dry completely before reinstalling them.
-
If necessary, replace the old filters with new ones.
-
Never use the vacuum cleaner without the motor and/or exhaust filter!
-
Cleaning the housing:
- Unplug the power cord.
The device, the power cord and the plug must never be immersed or rinsed in water
-
or other liquids! RISK OF ELECTRIC SHOCK!
- Clean the housing with a damp (not wet!) cloth. Use pure water or perhaps a few drops of
a mild detergent. Make sure that no moisture penetrates into the interior of the device
(ventilation slots).
- Do not use aggressive, caustic, alcohol- or petrol-based cleaning agents and avoid very hot
water.
- Do not use abrasive cleaning utensils to avoid damaging the surfaces.
18
Werbung
