Silva Homeline FC 50 Bedienungsanleitung/Sicherheitshinweise Seite 15

- The device may only be connected to a correctly installed, freely accessible protective
contact socket.
- The mains voltage must correspond to the voltage indicated on the rating plate of the
device: 220-240 V ~ 50-60 Hz.
- The device complies with the directives that are binding for the CE marking.
- Please note that the device is not completely disconnected from the mains after switching
off, only after pulling out the power plug!
- We recommend connecting the device to a single socket and avoiding connecting other
consumers to the same line (fuse).
- If the power cord and/or plug are damaged, the device must not be used.
- Insert the suction hose connector into the hose connection opening on the top cover.
- To remove the hose from the vacuum cleaner, press the tabs on both sides of the connector
and pull the hose out.
- Attach the telescopic suction pipe to the handle of the suction hose.
- Attach the floor brush to the suction tube.
- To adjust the length of the height-adjustable suction tube to your height, slide the suction
tube release button down and pull the lower end out to the desired length.
- Instead of the floor brush, the crevice nozzle/brush can also be attached to the suction pipe.
Parking positions:
Mains connection
Assembling the device
To store the vacuum cleaner in a space-saving manner,
push the telescopic rod together and insert the tab on the
floor brush into the slide-in rail on the back of the device.
Tab in
guide
15