elero AstroTec-868 bidi Bedienungsanleitung Seite 93

Troubleshooting
Warnhinweise
Troubleshooting
Problem Cause
Drive is not Faulty connection.
functioning.
Drive is not 1. Batteries are low.
functioning.
Transmission control 2. Batteries are inserted 2. Remove batteries
light is not
illuminated.
Drive is not 1. Receiver is outside
functioning. the radio operating
Transmission control range.
light is illuminated.
2. Transmitter has not
been programmed
into the receiver.
Astro programme 1. Date is incorrect.
doesn't function
properly. 2. Wrong city or wrong 2. Set correct city
latitude/
longitude setting.
3. Holiday function is
switched on.
4. Astro shift is set.
The AstroTec-868 The sliding switch
does not carry out the is set to "MAN ".
switching commands.
The AstroTec-868 Holiday function is
does not carry switched on.
out the switching
commands precisely.
Remedy
Check the connection.
1. Replace batteries.
and re-insert
correctly.
1. Reduce the distance
to the receiver.
2. Programme the
transmitter.
1. Set correct date.
or exact degrees
latitude/longitude.
3. Switch holiday
function off.
4. Adjust astro shift.
Move the sliding
switch to "AUTO ".
Switch holiday
function off.
EN-41