elero AstroTec-868 bidi Bedienungsanleitung Seite 81

Programming
INDIVIDUAL INDIVIDUAL
Press +/- for the INDIVIDUAL menu level (1,2,3,4,5,6,7).
All further entries now refer to every individual day of the week.
Confirm by pressing OK.
8. Now set the SWITCHING TIME
using the +/- buttons. Confirm each entry by pressing OK.
9. Press the MENU button to switch to operating mode.
PROGRAMME
PROG 2/INDIVIDUAL WEEK (Individual switching time
PROG 2/INDIVIDUAL BLOCK (Individual switching time
PROG 2/INDIVIDUAL INDIVIDUAL (Individual switching time
individual day)
PROGRAMME
OK
PROG 2
OK
OK OK
INDIVIDUAL WEEK
1. Press the MENU button.
2. To select the PROGAMME menu, press the
+ button until PROGAMME appears.
3. Confirm by pressing OK.
4. Press the + button. PROG 2 appears.
5. Confirm by pressing OK.
6. Press the + button until INDIVIDUAL appears.
7. Confirm by pressing OK.
and the SWITCHING TIME
OK
SWITCHING
SWITCHING
+/- +/-
+/–
+/–
PROGRAMM
for week)
for block 1/2)
for
K
OK
EN-29