elero AstroTec-868 bidi Bedienungsanleitung Seite 91

Programming
Warnhinweise
FUNCTION (only when the operating device is disconnected,
only for qualified electricians)
ROLLER SHUTTER/BLIND, DRIVE CONTROLLER/ GROUP
CONTROLLER, RUNNING TIME
(Selection of shutter/blind, selection of the drive controller/group
controller, running time of the roller shutter/blind)
OK
OK
+
O K
ROLLER SHUTTER/
FUNCTION
BLIND
+/–
1. Press the MENU button.
2. To select the FUNCTION menu, press the
+ button until FUNCTION appears.
3. Confirm by pressing OK. ROLLER SHUTTER/BLIND will appear.
4. You can select either roller shutter or blind using the +/- button.
5. Confirm by pressing OK. RUNNING TIME will appear.
6. You can set the required running time using the +/- button.
(Default setting: 120 seconds).
7. Confirm by pressing OK. EXPERT MODE ON/OFF will appear.
8. You can make the setting you require using the +/- button.
9. Confirm your selection by pressing OK. INITIAL OPERATION
will appear.
10. Confirm by pressing OK.
11. Press the MENU button to switch to operating mode.
OK OK
DRIVE CONTROLLER/ RUNNING
GROUP CONTROLLER TIME
+/– +/–
Operating
mode
EN-39